Basic Cisco 1252 AP WPA2 Personal AES CCMP Least Congested Channel Sample

After a lightning strike at the house, I've been running a SOHO Linksys WiFi router for some time.  I'm giving up on it and converting back to some more "enterprise-y" network hardware.  Here's a quick Cisco 1252 AP configuration. This is similar to a post of mine from a year or two ago, but now includes the option for the AP to pick the least congested channel from 1, 6 or 11.

ap#
ap#sh run
Building configuration...

Current configuration : 1318 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$cHI9$4dS0I6b8A3Rp3ecMQ2H6i1
!
no aaa new-model
!
!
!
dot11 ssid LauraAndRay
   authentication open
   authentication key-management wpa version 2
   guest-mode
   mbssid guest-mode
   wpa-psk ascii 7 1403170F070B30222A3B383C73
!
power inline negotiation prestandard source
!
!
username Cisco password 7 062506324F41
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm
 !
 ssid LauraAndRay
 !
 channel least-congested 2412 2437 2462
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address 192.168.10.253 255.255.255.0
 no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
!
end